PVC Pipes - Pumps, Valves, Piping and Fittings
PVC-U and CPVC pipes, valves, fittings and related components are used in selected marine freshwater, seawater, drainage, ballast, HVAC and utility systems. Selection depends on pressure, temperature, chemical compatibility, fire performance and vessel class requirements.
ProShipWorks provides end-to-end support to source and supply PVC Pipes for marine vessels, ship operators, industrial facilities, maintenance teams and procurement departments.
Last updated:
Product Information
| Product Name | PVC Pipes |
|---|---|
| Product Category | Pumps, Valves, Piping and Fittings |
| Product Reference | 609 |
| Brands / Manufacturers | GF Piping Systems, Spears Manufacturing, IPEX |
| Unit of Measure | Meter or Piece |
Key Features
| Key Feature |
|---|
| 1. Corrosion-resistant and lightweight |
| 2. Smooth internal surface with low friction loss |
| 3. Available in solvent-weld, threaded and flanged connections |
| 4. PVC-U is generally used for ambient-temperature services |
| 5. CPVC supports higher temperatures than standard PVC-U |
Applications of PVC Pipes
| Application |
|---|
| 1. Potable and technical freshwater systems |
| 2. Drainage, sanitary and grey-water piping |
| 3. Seawater, ballast and HVAC utility services where approved |
Models & Manufacturers
| Model | Manufacturer |
|---|---|
| PVC-U Industrial Piping System | GF Piping Systems |
| Schedule 40 and Schedule 80 PVC Piping System | Spears Manufacturing |
| Xirtec 140 PVC Piping System | IPEX |
Technical Specifications
| Model | Specification | Value | Unit |
|---|---|---|---|
| PVC-U Industrial Piping System | Material | Unplasticized polyvinyl chloride | — |
| Schedule 40 and Schedule 80 PVC Piping System | Nominal sizes | Typically 1/2 to 24 | inch |
| Xirtec 140 PVC Piping System | Connection method | Solvent cement, threaded or flanged, according to component | — |
| PVC-U Industrial Piping System | Service temperature | Typically about 0 to 60 | °C |
| Schedule 40 and Schedule 80 PVC Piping System | Pressure rating | Schedule, size and temperature dependent; verify manufacturer data | bar |
Standards, Certifications & Class Approval
Review the available standards and approval information relevant to the product. Actual certification, material traceability, inspection and classification requirements depend on the product type, intended application and purchasing specification.
| Applicable Standards & Certification | Common product standards include ISO 1452, EN 1452, ASTM D1785, ASTM D2466, ASTM D2467, ASTM D2564 and ASTM F437/F439/F441 where applicable. Potable-water and fire-performance approvals must be separately verified for the intended vessel installation. |
|---|---|
| Class Approval | Marine acceptance is project- and service-dependent. DNV, ABS, Lloyd's Register, Bureau Veritas and ClassNK may accept thermoplastic piping systems when the manufacturer, material, fire performance, installation and application comply with the applicable class rules. Approval should be confirmed for the specific vessel and service. |
Installation, Maintenance & Safety Information
| Installation Notes | Confirm pipe schedule, pressure rating, temperature, chemical compatibility and class requirements before installation. Use compatible manufacturer-approved solvent cement, cleaner, gaskets and flanges. Cut square, deburr, clean and allow joints to cure before pressure testing. Provide proper supports, guides and allowances for thermal movement. |
|---|---|
| Maintenance Tips | Inspect supports, joints, flanges and valves for leakage, impact damage, ultraviolet degradation and abnormal movement. Keep strainers and lines clear, avoid excessive tightening of threaded plastic connections, and replace damaged sections with compatible components. Follow the manufacturer's inspection and pressure-testing limits. |
| Safety Notes | Do not use PVC components for fuel, compressed gas, high-temperature or fire-main services unless specifically approved. Control solvent cement vapors and ignition sources, wear suitable gloves and eye protection, and depressurize and drain piping before maintenance. Verify fire-rating and class approval before use in enclosed or essential shipboard systems. |
Request a Quote for PVC Pipes
Contact ProShipWorks for marine or industrial product sourcing, quotations and delivery.
- Vessel name and IMO number
- ETA / vessel schedule
- Berth or vessel location
- Required quantity
- Preferred delivery window
- Shipping agent contact details
Other Pumps, Valves, Piping and Fittings Products
Explore our range of marine and industrial Pumps, Valves, Piping and Fittings products available for sourcing and supply through ProShipWorks.
Why ProShipWorks?
Trusted & Professional Service
Experienced maritime professionals focused on quality, safety and dependable service execution.
24/7 Rapid Response
Fast response for planned and urgent vessel requirements, whenever support is needed.
Unbeatable Prices
Cost-effective marine services with competitive and transparent pricing for vessel requirements.
Port & Anchorage Coverage
Reliable marine service support across ports, anchorages and offshore locations.