Cameras - IT and Communication Equipment

Marine cameras are ruggedized video devices used for surveillance, navigation support, situational awareness, and remote monitoring aboard ships and offshore installations. They may provide IP, thermal, visible-light, PTZ, low-light, or explosion-protected imaging.

ProShipWorks provides end-to-end support to source and supply Cameras for marine vessels, ship operators, industrial facilities, maintenance teams and procurement departments.

Last updated: October 11, 2026

Product Information

Product Name	Cameras
Product Category	IT and Communication Equipment
Product Reference	1636
Brands / Manufacturers	Teledyne FLIR, Axis Communications, Furuno
Unit of Measure	Piece

Key Features

Key Feature
1. Marine-grade corrosion-resistant housing
2. IP66 or higher environmental protection
3. Daylight, low-light, or thermal imaging options
4. Fixed, dome, or pan-tilt-zoom configurations
5. Ethernet, PoE, serial, or video outputs
6. Vibration, shock, and wide-temperature resistance

Applications of Cameras

Application
1. Deck, engine-room, accommodation, and perimeter surveillance
2. Navigation and situational awareness support
3. Cargo, mooring, berthing, and offshore asset monitoring

Models & Manufacturers

Model	Manufacturer
M300C	Teledyne FLIR
M364C LR	Teledyne FLIR
Q6225-LE	Axis Communications
Q6075-E	Axis Communications
FCV-1150 Camera System	Furuno

Technical Specifications

Model	Specification	Value	Unit
M300C	Camera type	Marine stabilized visible camera	—
M364C LR	Camera type	Marine stabilized visible and thermal camera	—
Q6225-LE	Camera type	Outdoor PTZ network camera with IR illumination	—
Q6075-E	Camera type	Outdoor PTZ network camera	—
M300C	Video interface	IP network video	—

Standards, Certifications & Class Approval

Review the available standards and approval information relevant to the product. Actual certification, material traceability, inspection and classification requirements depend on the product type, intended application and purchasing specification.

Applicable Standards & Certification	Applicable requirements may include IEC 60945 for maritime navigation and radiocommunication equipment, IEC 60533 for electromagnetic compatibility on ships, IEC 60092-504 for special features of control and instrumentation systems, and IEC 60529 for enclosure protection. Certification is model- and installation-specific.
Class Approval	Some marine camera systems or installations may receive type approval or product acceptance from DNV, ABS, Lloyd's Register, Bureau Veritas, or ClassNK. Approval must be confirmed for the specific model, vessel notation, hazardous-area requirement, and installation location.

Installation, Maintenance & Safety Information

Installation Notes	Install on a rigid, vibration-resistant structure with an unobstructed field of view. Use marine-rated cable glands, bonding, correctly rated power supplies, and approved Ethernet or video cabling. Verify IP, EMC, temperature, hazardous-area, and class requirements before installation.
Maintenance Tips	Clean lenses and protective windows with non-abrasive materials and fresh water where appropriate. Inspect seals, glands, mounting bolts, connectors, heaters, wipers, and corrosion protection. Check image quality, pan-tilt operation, firmware, recording, and network connectivity periodically.
Safety Notes	Isolate electrical power before servicing and follow the manufacturer's procedures. Do not open pressurized or hazardous-area cameras unless authorized. Confirm safe working conditions near moving PTZ mechanisms, high-voltage equipment, hot surfaces, and restricted or explosion-risk zones.