Monitors - IT and Communication Equipment

Marine monitors are ruggedized displays used for bridge navigation, engine-room automation, ship control, surveillance, and maritime IT or communication systems. They are designed for continuous operation, wide viewing angles, vibration, humidity, and marine electrical environments.

ProShipWorks provides end-to-end support to source and supply Monitors for marine vessels, ship operators, industrial facilities, maintenance teams and procurement departments.

Last updated: October 11, 2026

Product Information

Product Name	Monitors
Product Category	IT and Communication Equipment
Product Reference	1604
Brands / Manufacturers	Hatteland Technology, Furuno, JRC, Alphatron Marine
Unit of Measure	Piece

Key Features

Key Feature
1. High-brightness LCD or LED display
2. Wide input voltage and marine EMC performance
3. Optical bonding or anti-reflective front glass
4. Dimming suitable for daylight and night operation
5. Vibration, shock, humidity, and temperature resistance

Applications of Monitors

Application
1. Bridge navigation and ECDIS display systems
2. GMDSS, radar, communication, and monitoring consoles
3. Engine-room automation, vessel management, and CCTV systems

Models & Manufacturers

Model	Manufacturer
Series X Marine Display	Hatteland Technology
MU-190V	Furuno
MU-231	Furuno
Marine Bridge Display	JRC

Technical Specifications

Model	Specification	Value	Unit
Series X Marine Display	Display size	Various sizes, commonly 19 to 55	inch
MU-190V	Display size	19	inch
MU-231	Display size	23.1	inch
Marine Bridge Display	Typical power supply	24 VDC or 100-240 VAC, depending on model	—
Marine Bridge Display	Typical interfaces	DVI, VGA, HDMI, DisplayPort, or serial interfaces depending on model	—

Standards, Certifications & Class Approval

Review the available standards and approval information relevant to the product. Actual certification, material traceability, inspection and classification requirements depend on the product type, intended application and purchasing specification.

Applicable Standards & Certification	Marine navigation and communication monitors may be designed or type-tested to IEC 60945 for maritime navigation and radiocommunication equipment. Bridge display presentation may relate to IEC 62288. Exact compliance depends on the model and intended system.
Class Approval	Type-approved models may be accepted by DNV, ABS, Lloyd's Register, Bureau Veritas, or ClassNK. Approval is model-specific and should be verified from the manufacturer's certificate and vessel class requirements.

Installation, Maintenance & Safety Information

Installation Notes	Mount using the manufacturer's approved panel, desktop, or suspension arrangement. Provide adequate ventilation, correct DC polarity or AC supply, proper grounding, and protected signal cabling. Confirm cut-out dimensions, connectors, brightness requirements, and EMC separation before installation.
Maintenance Tips	Clean the display with a soft lint-free cloth and approved non-abrasive cleaner. Check mounting fasteners, connectors, cooling openings, brightness controls, and cable condition during planned maintenance. Keep ventilation paths clear and replace defective units with the same approved type.
Safety Notes	Isolate and lock out electrical power before installation or servicing. Follow the manufacturer's voltage, grounding, and fuse requirements. Do not open the enclosure unless authorized, and use certified replacement parts where required for navigation or safety-related systems.