Anti Spatter Spray - Welding and Fabrication

Anti-spatter spray is applied to welding nozzles, contact tips, fixtures and nearby steel surfaces to reduce adhesion of molten weld spatter. It is commonly used during shipbuilding, ship repair, steel fabrication and onboard maintenance welding.

ProShipWorks provides end-to-end support to source and supply Anti Spatter Spray for marine vessels, ship operators, industrial facilities, maintenance teams and procurement departments.

Last updated: October 11, 2026

Product Information

Product Name	Anti Spatter Spray
Product Category	Welding and Fabrication
Product Reference	1232
Brands / Manufacturers	CRC Industries, Henkel Loctite, ABICOR BINZEL
Unit of Measure	Can

Key Features

Key Feature
1. Reduces adhesion of welding spatter
2. Helps protect MIG/MAG torch nozzles and fixtures
3. Available in aerosol and liquid formulations
4. Some formulations are silicone-free
5. Supports easier post-weld cleaning

Applications of Anti Spatter Spray

Application
1. Shipyard hull and structural steel welding
2. Marine repair and maintenance welding
3. Protection of welding fixtures, jigs and torch components

Models & Manufacturers

Model	Manufacturer
CRC Anti-Spatter 03175	CRC Industries
LOCTITE SF 7900 Ceramic Shield	Henkel
Anti-Spatter Spray	ABICOR BINZEL

Technical Specifications

Model	Specification	Value	Unit
CRC Anti-Spatter 03175	Form	Aerosol spray	—
LOCTITE SF 7900 Ceramic Shield	Form	Aerosol ceramic protective coating	—
Anti-Spatter Spray	Primary use	Welding nozzle and fixture protection	—

Standards, Certifications & Class Approval

Review the available standards and approval information relevant to the product. Actual certification, material traceability, inspection and classification requirements depend on the product type, intended application and purchasing specification.

Applicable Standards & Certification	No universal marine or welding certification applies to anti-spatter spray. Use the manufacturer's current technical data sheet and safety data sheet; product labeling should comply with applicable GHS/CLP requirements.
Class Approval	Where required, confirm the applicable classification and approval requirements before ordering.

Installation, Maintenance & Safety Information

Installation Notes	Clean and dry the surface before application. Spray a light, even coat from the manufacturer's recommended distance, avoiding the weld joint and surfaces that must be painted or coated unless compatibility is confirmed. Allow solvent vapors to dissipate before welding.
Maintenance Tips	Keep the aerosol upright and tightly capped in a cool, dry, ventilated store. Check shelf life and nozzle condition, and remove accumulated spatter from equipment before reapplication.
Safety Notes	Use only with adequate ventilation and required welding PPE. Keep away from flames, hot surfaces and ignition sources because many products are flammable aerosols. Review the product SDS, avoid breathing spray mist, and confirm coating compatibility before painting or welding.