Grinding Wheels - Welding and Fabrication

Abrasive grinding wheels are consumable tools used in shipboard welding, steel fabrication, repair, and maintenance. They remove weld spatter, prepare joints, bevel plate edges, clean surfaces, and grind carbon steel, stainless steel, and other marine metals.

ProShipWorks provides end-to-end support to source and supply Grinding Wheels for marine vessels, ship operators, industrial facilities, maintenance teams and procurement departments.

Last updated: October 11, 2026

Product Information

Product Name	Grinding Wheels
Product Category	Welding and Fabrication
Product Reference	1256
Brands / Manufacturers	3M, Norton, PFERD, TYROLIT
Unit of Measure	Piece

Key Features

Key Feature
1. Resin-bonded abrasive construction
2. Available for steel and stainless-steel applications
3. Common 115 mm, 125 mm, 180 mm, and 230 mm diameters
4. Designed for portable angle grinders
5. Reinforced for controlled high-speed grinding

Applications of Grinding Wheels

Application
1. Weld bead removal and blending
2. Steel plate edge preparation and beveling
3. Removal of rust, scale, and weld spatter

Models & Manufacturers

Model	Manufacturer
Cubitron II Grinding Wheel	3M
Quantum3 Grinding Wheel	Norton
PSF Grinding Wheel	PFERD
High Performance Grinding Wheel	TYROLIT

Technical Specifications

Model	Specification	Value	Unit
Cubitron II Grinding Wheel	Typical diameter	115, 125, 180, 230	mm
Quantum3 Grinding Wheel	Abrasive grain	Aluminum oxide or ceramic aluminum oxide, depending on grade	—
PSF Grinding Wheel	Typical thickness	Approximately 6	mm
High Performance Grinding Wheel	Maximum operating speed	Product-specific; verify wheel label before use	rpm

Standards, Certifications & Class Approval

Review the available standards and approval information relevant to the product. Actual certification, material traceability, inspection and classification requirements depend on the product type, intended application and purchasing specification.

Applicable Standards & Certification	Bonded grinding wheels are commonly manufactured and marked according to EN 12413 and ISO 525. Wheel diameter, bore, abrasive type, maximum operating speed, and safety markings must be checked on the product label.
Class Approval	Grinding wheels are generally consumable tools and are not individually type-approved by DNV, ABS, Lloyd's Register, BV, or ClassNK. Use should comply with vessel safety procedures, flag requirements, and the manufacturer's instructions.

Installation, Maintenance & Safety Information

Installation Notes	Verify wheel type, diameter, bore, abrasive grade, and maximum rpm match the angle grinder. Inspect for cracks or damage, fit the correct flange, tighten correctly, and run the wheel briefly at no-load before grinding. Do not use a grinding wheel for side cutting unless specifically designed for that purpose.
Maintenance Tips	Store wheels dry, flat, and protected from impact, moisture, frost, and excessive heat. Do not use dropped, cracked, expired, or visibly damaged wheels. Keep unused wheels in their original packaging and inspect before installation.
Safety Notes	Wear a face shield over safety glasses, hearing protection, gloves, flame-resistant clothing, and suitable respiratory protection where required. Install the grinder guard, maintain a safe stance, control sparks and hot debris, and keep flammable materials away. Follow the wheel manufacturer's maximum speed and safety instructions.