Oxy Fuel Welding Equipment - Welding and Fabrication

Oxy-fuel welding equipment uses oxygen with acetylene, propane, or other fuel gas for marine cutting, brazing, heating, repair, and fabrication. A typical outfit includes regulators, flashback arrestors, hoses, torch, tips, cylinders, and accessories.

ProShipWorks provides end-to-end support to source and supply Oxy Fuel Welding Equipment for marine vessels, ship operators, industrial facilities, maintenance teams and procurement departments.

Last updated: October 11, 2026

Product Information

Product Name	Oxy Fuel Welding Equipment
Product Category	Welding and Fabrication
Product Reference	1253
Brands / Manufacturers	GCE, ESAB, Victor
Unit of Measure	Set

Key Features

Key Feature
1. Suitable for oxy-acetylene and oxy-fuel welding or cutting
2. Separate oxygen and fuel-gas pressure regulators
3. Flashback arrestors and non-return valves for flame protection
4. Interchangeable welding, heating, brazing, and cutting tips
5. Marine-grade hoses and fittings available in multiple lengths

Applications of Oxy Fuel Welding Equipment

Application
1. Shipboard pipe, plate, and structural repair
2. Cutting and fabrication during shipbuilding or dry-docking
3. Brazing, heating, loosening seized parts, and maintenance work

Models & Manufacturers

Model	Manufacturer
X11	GCE
X21	GCE
Journeyman II	Victor
Harris 15	Harris Products Group

Technical Specifications

Model	Specification	Value	Unit
X11	Equipment type	Oxy-fuel welding and cutting torch system	—
X21	Equipment type	Oxy-fuel welding and cutting torch system	—
Journeyman II	Equipment type	Oxy-fuel welding and cutting outfit	—
Harris 15	Equipment type	Oxy-fuel welding and cutting torch	—
General system	Fuel gases	Acetylene, propane, propylene, or other approved fuel gas depending on torch and tip	—
General system	Main components	Cylinders, regulators, hoses, flashback arrestors, torch, tips, and non-return valves	—

Standards, Certifications & Class Approval

Review the available standards and approval information relevant to the product. Actual certification, material traceability, inspection and classification requirements depend on the product type, intended application and purchasing specification.

Applicable Standards & Certification	Commonly referenced standards include ISO 5172 for gas-welding blowpipes, ISO 2503 for gas-welding pressure regulators, ISO 3821 for rubber hoses for welding and allied processes, and ISO 14114 for gas supply equipment. Applicable national CGA, EN, or regional requirements may also apply.
Class Approval	Classification societies such as DNV, ABS, Lloyd's Register, Bureau Veritas, and ClassNK may accept equipment subject to approved manufacturer documentation, applicable statutory requirements, and vessel-specific procedures. Portable oxy-fuel outfits are not automatically class-approved.

Installation, Maintenance & Safety Information

Installation Notes	Secure cylinders upright in ventilated areas and keep oxygen equipment free from oil and grease. Fit the correct regulators, hoses, non-return valves, and flashback arrestors for the selected gases. Leak-test all connections with an approved leak-detection solution before use.
Maintenance Tips	Inspect hoses, regulators, valves, tips, torch bodies, and arrestors before each use. Replace damaged or contaminated components and clean tips with suitable tip cleaners. Store cylinders secured with valve protection caps and have regulators periodically inspected and calibrated as required.
Safety Notes	Use only by trained personnel under the vessel's hot-work permit and gas-free procedures. Keep ignition sources and combustibles controlled, provide ventilation and fire watch, and wear suitable eye, hand, body, and foot protection. Never use oil or grease on oxygen fittings, and close cylinder valves after use.