Blasting Hoses - Shipyard and Dry Dock Equipment
Abrasive blasting hoses convey compressed air and abrasive media from blast machines to nozzle assemblies during shipyard, dry-dock, tank, hull and structural steel surface preparation. They are reinforced, abrasion-resistant hoses designed for controlled high-pressure blasting service.
ProShipWorks provides end-to-end support to source and supply Blasting Hoses for marine vessels, ship operators, industrial facilities, maintenance teams and procurement departments.
Last updated:
Product Information
| Product Name | Blasting Hoses |
|---|---|
| Product Category | Shipyard and Dry Dock Equipment |
| Product Reference | 1311 |
| Brands / Manufacturers | Clemco, BlastOne, Kuriyama |
| Unit of Measure | Meter |
Key Features
| Key Feature |
|---|
| 1. Abrasion-resistant rubber tube and cover |
| 2. Textile or wire-reinforced construction |
| 3. Electrically conductive or anti-static design |
| 4. Compatible with abrasive-blasting couplings and nozzles |
| 5. Available in multiple inside diameters and lengths |
Applications of Blasting Hoses
| Application |
|---|
| 1. Ship hull and deck surface preparation |
| 2. Dry-dock blasting of steel structures and tanks |
| 3. Removal of marine coatings, rust and scale |
Models & Manufacturers
| Model | Manufacturer |
|---|---|
| Supa Blast Hose | Clemco Industries Corp. |
| 2-Braid Blast Hose | Clemco Industries Corp. |
| UltraFlex Blast Hose | BlastOne International |
Technical Specifications
| Model | Specification | Value | Unit |
|---|---|---|---|
| Supa Blast Hose | Typical inside diameter | 13, 19, 25, 32, 38 | mm |
| Supa Blast Hose | Typical working pressure | Up to approximately 15 | bar |
| 2-Braid Blast Hose | Reinforcement | Two textile reinforcement layers | — |
| 2-Braid Blast Hose | Typical inside diameter | 19, 25, 32 | mm |
| UltraFlex Blast Hose | Service | Abrasive blast air and media conveying | — |
Standards, Certifications & Class Approval
Review the available standards and approval information relevant to the product. Actual certification, material traceability, inspection and classification requirements depend on the product type, intended application and purchasing specification.
| Applicable Standards & Certification | ISO 3861 specifies requirements for rubber hoses for sand and grit blasting. Hose assemblies should also be selected according to the manufacturer’s pressure rating, conductivity requirements and applicable workplace regulations. CE marking may apply to associated equipment or assemblies where legally required. |
|---|---|
| Class Approval | Blasting hoses generally do not have standalone DNV, ABS, Lloyd’s Register, BV or ClassNK type approval. Shipyard acceptance may require traceability, manufacturer certificates, pressure ratings and compliance with the vessel owner’s coating and safety procedures. |
Installation, Maintenance & Safety Information
| Installation Notes | Select the hose inside diameter and pressure rating to match the blast machine, abrasive, nozzle and couplings. Use compatible blast-hose couplings, safety pins and whip checks. Keep hose runs as short and straight as practical, and prevent sharp bends, kinking and contact with hot surfaces. |
|---|---|
| Maintenance Tips | Inspect before each shift for cuts, soft spots, exposed reinforcement, excessive wear and damaged couplings. Check electrical continuity where conductive hose is specified. Rotate or replace worn sections and keep hose ends capped and dry during storage. |
| Safety Notes | Depressurize and isolate the blast system before disconnecting or servicing. Never exceed the hose working pressure or use ordinary air hose for abrasive blasting. Secure all couplings with safety devices, wear approved blasting PPE, and replace hose immediately when reinforcement is exposed or the cover is severely damaged. |
Request a Quote for Blasting Hoses
Contact ProShipWorks for marine or industrial product sourcing, quotations and delivery.
- Vessel name and IMO number
- ETA / vessel schedule
- Berth or vessel location
- Required quantity
- Preferred delivery window
- Shipping agent contact details
Other Shipyard and Dry Dock Equipment Products
Explore our range of marine and industrial Shipyard and Dry Dock Equipment products available for sourcing and supply through ProShipWorks.
Why ProShipWorks?
Trusted & Professional Service
Experienced maritime professionals focused on quality, safety and dependable service execution.
24/7 Rapid Response
Fast response for planned and urgent vessel requirements, whenever support is needed.
Unbeatable Prices
Cost-effective marine services with competitive and transparent pricing for vessel requirements.
Port & Anchorage Coverage
Reliable marine service support across ports, anchorages and offshore locations.