Oil Centrifuges - Engine Room Consumables and Spares
Marine oil centrifuges are high-speed disc-stack separators used to remove water and solid contaminants from fuel oil, lubricating oil and hydraulic oil. Spare requirements commonly include bowl parts, seals, bearings, friction pads, paring discs, gaskets and service kits.
ProShipWorks provides end-to-end support to source and supply Oil Centrifuges for marine vessels, ship operators, industrial facilities, maintenance teams and procurement departments.
Last updated:
Product Information
| Product Name | Oil Centrifuges |
|---|---|
| Product Category | Engine Room Consumables and Spares |
| Product Reference | 1384 |
| Brands / Manufacturers | Alfa Laval, Mitsubishi Kakoki Kaisha, GEA |
| Unit of Measure | Piece or Set |
Key Features
| Key Feature |
|---|
| 1. Disc-stack centrifugal separation |
| 2. Removal of water and suspended solids |
| 3. Suitable for marine fuel and lubricating oils |
| 4. Continuous or intermittent sludge discharge |
| 5. High-speed bowl assembly |
| 6. OEM serviceable wear and sealing components |
Applications of Oil Centrifuges
| Application |
|---|
| 1. Marine diesel fuel oil purification |
| 2. Main and auxiliary engine lubricating oil purification |
| 3. Hydraulic and stern-tube oil cleaning |
Models & Manufacturers
| Model | Manufacturer |
|---|---|
| MIB 503 | Alfa Laval |
| S 821 | Alfa Laval |
| SJ10G | Mitsubishi Kakoki Kaisha |
| SJ20G | Mitsubishi Kakoki Kaisha |
| OSE series | GEA |
Technical Specifications
| Model | Specification | Value | Unit |
|---|---|---|---|
| MIB 503 | Separator type | Disc-stack centrifugal separator | — |
| MIB 503 | Typical service | Marine fuel oil and lubricating oil purification | — |
| S 821 | Discharge arrangement | Self-cleaning bowl configuration | — |
| SJ10G | Separator type | Disc-stack centrifugal oil separator | — |
| SJ20G | Typical service | Marine fuel and lubricating oil separation | — |
| OSE series | Typical service | Oil and fuel purification in marine and industrial installations | — |
Standards, Certifications & Class Approval
Review the available standards and approval information relevant to the product. Actual certification, material traceability, inspection and classification requirements depend on the product type, intended application and purchasing specification.
| Applicable Standards & Certification | Applicable requirements depend on the complete separator installation and vessel specification. Equipment may be supplied with manufacturer conformity documentation and marine type-approval certificates. ISO 8217 is relevant to marine fuel quality, not a centrifuge product standard. |
|---|---|
| Class Approval | Marine installations may be accepted or type-approved by DNV, ABS, Lloyd's Register, Bureau Veritas, ClassNK or another vessel classification society, subject to the specific model, application, installation and certificate status. |
Installation, Maintenance & Safety Information
| Installation Notes | Install on a rigid, level foundation with correct vibration isolation, piping support, electrical supply, heating, feed pressure and discharge arrangements. Confirm bowl rotation direction, operating water connections and clearances against the OEM manual. Use the correct gravity disc or operating configuration for the oil density. |
|---|---|
| Maintenance Tips | Follow the maker's running-hour service schedule. Clean the bowl and disc stack, inspect bearings, seals, gaskets, friction pads, paring discs and lock-ring components, and replace worn parts with approved spares. Check vibration, leakage, operating temperature and discharge performance. |
| Safety Notes | Isolate electrical power, shut off feed and heating, depressurize and allow the bowl to stop completely before opening. Hot oil and sludge can cause burns. Do not operate with damaged bowl parts, incorrect assembly, excessive vibration or bypassed safety interlocks. |
Request a Quote for Oil Centrifuges
Contact ProShipWorks for marine or industrial product sourcing, quotations and delivery.
- Vessel name and IMO number
- ETA / vessel schedule
- Berth or vessel location
- Required quantity
- Preferred delivery window
- Shipping agent contact details
Other Engine Room Consumables and Spares Products
Explore our range of marine and industrial Engine Room Consumables and Spares products available for sourcing and supply through ProShipWorks.
Why ProShipWorks?
Trusted & Professional Service
Experienced maritime professionals focused on quality, safety and dependable service execution.
24/7 Rapid Response
Fast response for planned and urgent vessel requirements, whenever support is needed.
Unbeatable Prices
Cost-effective marine services with competitive and transparent pricing for vessel requirements.
Port & Anchorage Coverage
Reliable marine service support across ports, anchorages and offshore locations.