Seals - Engine Room Consumables and Spares
Marine engine room seals include O-rings, gaskets, mechanical seals, shaft seals, lip seals and packing used in engines, pumps, valves, heat exchangers and piping systems. Selection depends on fluid, temperature, pressure, shaft speed, dimensions and equipment maker requirements.
ProShipWorks provides end-to-end support to source and supply Seals for marine vessels, ship operators, industrial facilities, maintenance teams and procurement departments.
Last updated:
Product Information
| Product Name | Seals |
|---|---|
| Product Category | Engine Room Consumables and Spares |
| Product Reference | 1402 |
| Brands / Manufacturers | Trelleborg Sealing Solutions, Freudenberg Sealing Technologies, Klinger, Garlock, James Walker, EagleBurgmann, Chesterton |
| Unit of Measure | Piece or Set |
Key Features
| Key Feature |
|---|
| 1. Resistant to seawater, fuel oil, lubricating oil and hydraulic fluids |
| 2. Available in elastomer, graphite, PTFE, aramid fibre and mechanical seal materials |
| 3. Supplied as standard sizes or equipment-specific replacement parts |
| 4. Suitable for static and dynamic sealing applications |
| 5. Marine-grade materials available for elevated temperature and pressure service |
Applications of Seals
| Application |
|---|
| 1. Main and auxiliary engine sealing systems |
| 2. Seawater, cooling-water and fuel-oil pumps |
| 3. Valves, flanges, heat exchangers and pipe connections |
Models & Manufacturers
| Model | Manufacturer |
|---|---|
| Turcon Sealing Solutions | Trelleborg Sealing Solutions |
| SIMRIT Radial Shaft Seals | Freudenberg Sealing Technologies |
| KLINGER KGS Gasket System | Klinger |
| GARLOCK Style 9000 | Garlock |
| Chesterton Mechanical Seals | Chesterton |
| EagleBurgmann Mechanical Seals | EagleBurgmann |
Technical Specifications
| Model | Specification | Value | Unit |
|---|---|---|---|
| General O-ring | Common materials | NBR, FKM, EPDM, FFKM | — |
| General O-ring | Dimensional standard | ISO 3601 | — |
| Radial shaft seal | Common standard | DIN 3760 | — |
| Spiral-wound gasket | Construction | Metal winding with graphite or PTFE filler | — |
| Compressed fibre gasket | Typical service | Flanges, pumps, valves and heat exchangers | — |
| Mechanical seal | Typical face materials | Carbon, silicon carbide, tungsten carbide | — |
Standards, Certifications & Class Approval
Review the available standards and approval information relevant to the product. Actual certification, material traceability, inspection and classification requirements depend on the product type, intended application and purchasing specification.
| Applicable Standards & Certification | Applicable standards may include ISO 3601 for O-rings, DIN 3760 for radial shaft seals, EN 1514 for flange gaskets, EN 12756 for mechanical seals and ASME B16.20 for metallic gaskets. The applicable standard depends on the seal type and equipment. |
|---|---|
| Class Approval | Seals are not universally class-approved as a generic product. Type approval or acceptance may be required for specific machinery, piping systems, fire-safe service or critical applications by DNV, ABS, Lloyd's Register, Bureau Veritas, ClassNK or another relevant society. |
Installation, Maintenance & Safety Information
| Installation Notes | Verify part number, dimensions, material compatibility, pressure, temperature and equipment-maker instructions. Clean sealing faces, remove old material without damage, lubricate compatible O-rings, install without twisting, and tighten fasteners to the specified sequence and torque. |
|---|---|
| Maintenance Tips | Inspect for leakage, hardening, cracking, wear, extrusion and compression set during planned maintenance. Replace seals during major equipment overhauls or whenever removed, and store spares in a cool, dry place away from sunlight, ozone, heat and chemicals. |
| Safety Notes | Isolate, depressurize, drain and cool equipment before opening any sealed system. Use chemical-resistant gloves and eye protection, verify absence of hazardous fluids, and never reuse damaged seals or substitute materials without engineering approval. |
Request a Quote for Seals
Contact ProShipWorks for marine or industrial product sourcing, quotations and delivery.
- Vessel name and IMO number
- ETA / vessel schedule
- Berth or vessel location
- Required quantity
- Preferred delivery window
- Shipping agent contact details
Other Engine Room Consumables and Spares Products
Explore our range of marine and industrial Engine Room Consumables and Spares products available for sourcing and supply through ProShipWorks.
Why ProShipWorks?
Trusted & Professional Service
Experienced maritime professionals focused on quality, safety and dependable service execution.
24/7 Rapid Response
Fast response for planned and urgent vessel requirements, whenever support is needed.
Unbeatable Prices
Cost-effective marine services with competitive and transparent pricing for vessel requirements.
Port & Anchorage Coverage
Reliable marine service support across ports, anchorages and offshore locations.