Rubber Gaskets - Engine Room Consumables and Spares
Rubber gaskets are resilient sealing components used in marine engine rooms to prevent leakage at flanged joints, covers, pipes, pumps, valves, heat exchangers and machinery connections. Material selection depends on the fluid, temperature, pressure and flange design.
ProShipWorks provides end-to-end support to source and supply Rubber Gaskets for marine vessels, ship operators, industrial facilities, maintenance teams and procurement departments.
Last updated:
Product Information
| Product Name | Rubber Gaskets |
|---|---|
| Product Category | Engine Room Consumables and Spares |
| Product Reference | 1415 |
| Brands / Manufacturers | Trelleborg, James Walker, Garlock, KLINGER, TEADIT |
| Unit of Measure | Piece |
Key Features
| Key Feature |
|---|
| 1. Elastomeric sealing material with compressibility |
| 2. Available as sheet, molded, O-ring or profile gasket |
| 3. Suitable for water, air, oils, fuels or selected chemicals |
| 4. Available in standard flange and custom-cut shapes |
| 5. Requires compatibility with temperature, pressure and fluid |
Applications of Rubber Gaskets
| Application |
|---|
| 1. Cooling-water, seawater and freshwater pipe flanges |
| 2. Fuel-oil, lubricating-oil and hydraulic equipment |
| 3. Pumps, valves, strainers, heat exchangers and tank covers |
Models & Manufacturers
| Model | Manufacturer |
|---|---|
| BLUE-GARD Style 3000 | Garlock |
| KLINGERsil C-4430 | KLINGER |
| TEADIT Style 2003 | TEADIT |
| O-Ring 2-xxx Series | Trelleborg |
Technical Specifications
| Model | Specification | Value | Unit |
|---|---|---|---|
| BLUE-GARD Style 3000 | Material | Compressed non-asbestos aramid fiber with nitrile binder | — |
| KLINGERsil C-4430 | Material | Compressed fiber gasket sheet with elastomer binder | — |
| TEADIT Style 2003 | Material | Compressed fiber gasket sheet with NBR binder | — |
| O-Ring 2-xxx Series | Common materials | NBR, EPDM, FKM or silicone, selected by service | — |
| General rubber gasket | Hardness | Typically 60 to 80 | Shore A |
Standards, Certifications & Class Approval
Review the available standards and approval information relevant to the product. Actual certification, material traceability, inspection and classification requirements depend on the product type, intended application and purchasing specification.
| Applicable Standards & Certification | Applicable requirements may include EN 1514-1 for flange gasket dimensions, ISO 3601 for O-rings, ASTM F104 for nonmetallic gasket classification, and ASTM D2000 for elastomer classification. The exact standard depends on gasket type and service. |
|---|---|
| Class Approval | Classification approval is application- and manufacturer-specific rather than universal. DNV, ABS, Lloyd's Register, Bureau Veritas and ClassNK may accept or approve gasket materials for specified piping, machinery or fire-safety applications when supported by required documentation. |
Installation, Maintenance & Safety Information
| Installation Notes | Verify gasket material, dimensions, pressure rating, temperature rating and fluid compatibility. Clean and inspect flange faces, align the joint without forcing it, use the specified bolts and tighten in the manufacturer's cross-pattern sequence to the stated torque. Do not reuse compressed gaskets unless specifically approved. |
|---|---|
| Maintenance Tips | Inspect accessible joints for leakage, swelling, cracking, hardening or extrusion. Check flange bolts and joint condition during planned maintenance. Replace gaskets after dismantling where compression set or damage is present, and store spares clean, dry, cool and protected from sunlight and ozone. |
| Safety Notes | Isolate, depressurize, drain and cool the system before dismantling. Treat fuel, oil, steam, hot water and chemical lines as hazardous. Confirm the replacement gasket is compatible with the service and never substitute rubber for a fire-safe or high-temperature gasket without engineering approval. |
Request a Quote for Rubber Gaskets
Contact ProShipWorks for marine or industrial product sourcing, quotations and delivery.
- Vessel name and IMO number
- ETA / vessel schedule
- Berth or vessel location
- Required quantity
- Preferred delivery window
- Shipping agent contact details
Other Engine Room Consumables and Spares Products
Explore our range of marine and industrial Engine Room Consumables and Spares products available for sourcing and supply through ProShipWorks.
Why ProShipWorks?
Trusted & Professional Service
Experienced maritime professionals focused on quality, safety and dependable service execution.
24/7 Rapid Response
Fast response for planned and urgent vessel requirements, whenever support is needed.
Unbeatable Prices
Cost-effective marine services with competitive and transparent pricing for vessel requirements.
Port & Anchorage Coverage
Reliable marine service support across ports, anchorages and offshore locations.