Cable Trays - Electrical, Lighting and Power
Marine cable trays provide protected, organized routing and mechanical support for electrical, lighting, instrumentation, and power cables on ships and offshore platforms. They are commonly manufactured from galvanized or stainless steel and may include covers, bends, tees, reducers, and mounting accessories.
ProShipWorks provides end-to-end support to source and supply Cable Trays for marine vessels, ship operators, industrial facilities, maintenance teams and procurement departments.
Last updated:
Product Information
| Product Name | Cable Trays |
|---|---|
| Product Category | Electrical, Lighting and Power |
| Product Reference | 548 |
| Brands / Manufacturers | OBO Bettermann, Niedax, Pemsa |
| Unit of Measure | Meter or Piece |
Key Features
| Key Feature |
|---|
| 1. Perforated or ladder-type construction for cable support and ventilation |
| 2. Marine-grade galvanized steel, stainless steel, or aluminum options |
| 3. Modular bends, tees, reducers, covers, and splice accessories |
| 4. Suitable for engine rooms, accommodation spaces, decks, and technical areas |
| 5. Designed for corrosion resistance, mechanical strength, and bonding continuity |
Applications of Cable Trays
| Application |
|---|
| 1. Routing power and distribution cables |
| 2. Supporting lighting, control, instrumentation, and communication cables |
| 3. Cable installation in engine rooms, switchboard rooms, accommodation areas, and offshore modules |
Models & Manufacturers
| Model | Manufacturer |
|---|---|
| MKS-Magic cable tray system | OBO Bettermann |
| RKS-Magic cable tray system | Niedax |
| Rejiband cable tray system | Pemsa |
Technical Specifications
| Model | Specification | Value | Unit |
|---|---|---|---|
| MKS-Magic cable tray system | Material options | Hot-dip galvanized steel, stainless steel, or other listed finishes depending on product variant | — |
| RKS-Magic cable tray system | Construction | Perforated or solid-bottom tray configurations depending on product variant | — |
| Rejiband cable tray system | Construction | Electro-welded wire mesh cable tray | — |
| Marine cable tray systems | Typical width range | Commonly supplied in approximately 50 to 600 mm widths, subject to manufacturer and project requirements | mm |
| Marine cable tray systems | Typical length | Commonly supplied in approximately 2 to 3 m sections, subject to manufacturer | m |
Standards, Certifications & Class Approval
Review the available standards and approval information relevant to the product. Actual certification, material traceability, inspection and classification requirements depend on the product type, intended application and purchasing specification.
| Applicable Standards & Certification | IEC 61537 applies to cable tray and cable ladder systems. Marine electrical installations may also require compliance with applicable IEC 60092 requirements, SOLAS, flag-state rules, and project specifications. Material and coating requirements depend on the selected product and environment. |
|---|---|
| Class Approval | DNV, ABS, Lloyd's Register, Bureau Veritas, and ClassNK may accept or approve cable support systems when product-specific type approval or installation approval is available. Approval status is manufacturer-, material-, fire-rating-, and project-specific and must be verified from current certificates. |
Installation, Maintenance & Safety Information
| Installation Notes | Install trays on approved supports with spacing suitable for the tray load and vessel vibration environment. Maintain separation between power and low-voltage cables where required, provide smooth bends, fit covers in exposed or hazardous areas, and ensure metallic sections are electrically bonded and connected to the vessel grounding system. |
|---|---|
| Maintenance Tips | Inspect periodically for corrosion, loose fasteners, damaged supports, overloaded sections, missing covers, and deteriorated bonding jumpers. Remove debris and repair coating damage using an approved marine-compatible system. |
| Safety Notes | Confirm cable fill, weight, temperature, fire-zone, and hazardous-area requirements before installation. Use suitable lifting and cutting equipment, deburr cut edges, wear hand and eye protection, and avoid drilling or welding without authorization near live cables, tanks, or classified spaces. |
Request a Quote for Cable Trays
Contact ProShipWorks for marine or industrial product sourcing, quotations and delivery.
- Vessel name and IMO number
- ETA / vessel schedule
- Berth or vessel location
- Required quantity
- Preferred delivery window
- Shipping agent contact details
Other Electrical, Lighting and Power Products
Explore our range of marine and industrial Electrical, Lighting and Power products available for sourcing and supply through ProShipWorks.
Why ProShipWorks?
Trusted & Professional Service
Experienced maritime professionals focused on quality, safety and dependable service execution.
24/7 Rapid Response
Fast response for planned and urgent vessel requirements, whenever support is needed.
Unbeatable Prices
Cost-effective marine services with competitive and transparent pricing for vessel requirements.
Port & Anchorage Coverage
Reliable marine service support across ports, anchorages and offshore locations.