Foul Release Coating - Marine Paint and Painting Equipment
Marine foul-release coating is a low-surface-energy hull coating designed to reduce adhesion of marine organisms and simplify hull cleaning. It is normally applied over an approved anticorrosive primer and tie coat using marine coating application equipment.
ProShipWorks provides end-to-end support to source and supply Foul Release Coating for marine vessels, ship operators, industrial facilities, maintenance teams and procurement departments.
Last updated:
Product Information
| Product Name | Foul Release Coating |
|---|---|
| Product Category | Marine Paint and Painting Equipment |
| Product Reference | 912 |
| Brands / Manufacturers | International Paint, Hempel, PPG Protective and Marine Coatings |
| Unit of Measure | Liter |
Key Features
| Key Feature |
|---|
| 1. Silicone or hydrogel-based low-surface-energy finish |
| 2. Reduces attachment of fouling organisms |
| 3. Supports easier underwater cleaning |
| 4. Applied over compatible primer and tie coat systems |
| 5. Requires controlled surface preparation and film thickness |
Applications of Foul Release Coating
| Application |
|---|
| 1. Ship and vessel underwater hulls |
| 2. Commercial, naval, and offshore support vessels |
| 3. Newbuilding, dry-docking, and hull recoating projects |
Models & Manufacturers
| Model | Manufacturer |
|---|---|
| Intersleek 1100SR | International Paint |
| Intersleek 425 | International Paint |
| Hempaguard X7 | Hempel |
| Sigmaglide 1290 | PPG Protective and Marine Coatings |
Technical Specifications
| Model | Specification | Value | Unit |
|---|---|---|---|
| Intersleek 1100SR | Coating type | Silicone foul-release coating | — |
| Intersleek 425 | Coating type | Silicone foul-release coating | — |
| Hempaguard X7 | Coating type | Hydrogel foul-release coating | — |
| Sigmaglide 1290 | Coating type | Silicone foul-release coating | — |
Standards, Certifications & Class Approval
Review the available standards and approval information relevant to the product. Actual certification, material traceability, inspection and classification requirements depend on the product type, intended application and purchasing specification.
| Applicable Standards & Certification | Product-specific technical data sheets and application manuals govern compliance. ISO 12944 may be relevant to the protective coating system, while IMO biofouling guidance may apply to vessel management. Exact approvals and environmental compliance must be verified with the manufacturer. |
|---|---|
| Class Approval | Foul-release systems may be accepted within class-approved coating schemes or project specifications by DNV, ABS, Lloyd's Register, Bureau Veritas, or ClassNK. Approval is product-, vessel-, and application-specific and must be confirmed with the coating manufacturer and attending class society. |
Installation, Maintenance & Safety Information
| Installation Notes | Prepare the steel or existing coating according to the manufacturer's specification. Apply the approved primer, tie coat, and foul-release layer using suitable airless spray equipment, correct tip size, pressure, mixing procedure, environmental controls, and specified dry-film thickness. Observe curing and immersion times. |
|---|---|
| Maintenance Tips | Inspect the hull coating during dry-docking and underwater surveys. Use manufacturer-approved soft cleaning methods and avoid abrasive tools or aggressive brushes that can damage the silicone surface. Repair damaged areas using the specified repair system. |
| Safety Notes | Review the product safety data sheet before use. Provide ventilation, suitable respiratory and skin protection, ignition control, and protective clothing. Control solvents, overspray, and marine discharge, and follow shipyard permit-to-work and confined-space procedures. |
Request a Quote for Foul Release Coating
Contact ProShipWorks for marine or industrial product sourcing, quotations and delivery.
- Vessel name and IMO number
- ETA / vessel schedule
- Berth or vessel location
- Required quantity
- Preferred delivery window
- Shipping agent contact details
Other Marine Paint and Painting Equipment Products
Explore our range of marine and industrial Marine Paint and Painting Equipment products available for sourcing and supply through ProShipWorks.
Why ProShipWorks?
Trusted & Professional Service
Experienced maritime professionals focused on quality, safety and dependable service execution.
24/7 Rapid Response
Fast response for planned and urgent vessel requirements, whenever support is needed.
Unbeatable Prices
Cost-effective marine services with competitive and transparent pricing for vessel requirements.
Port & Anchorage Coverage
Reliable marine service support across ports, anchorages and offshore locations.