High Build Epoxy - Marine Paint and Painting Equipment
High-build epoxy marine paint is a two-component protective coating applied to steel structures, decks, tanks, machinery foundations, and shipboard equipment. Application commonly uses airless spray, brush, or roller equipment to achieve thick, durable corrosion-resistant films.
ProShipWorks provides end-to-end support to source and supply High Build Epoxy for marine vessels, ship operators, industrial facilities, maintenance teams and procurement departments.
Last updated:
Product Information
| Product Name | High Build Epoxy |
|---|---|
| Product Category | Marine Paint and Painting Equipment |
| Product Reference | 932 |
| Brands / Manufacturers | Jotun, Hempel, International Protective Coatings, Graco, WAGNER |
| Unit of Measure | Liter or Kit |
Key Features
| Key Feature |
|---|
| 1. Two-component epoxy resin and curing agent |
| 2. High dry-film thickness per coat |
| 3. Good corrosion and abrasion resistance |
| 4. Suitable for marine atmospheric and immersed service when specified |
| 5. Applied by airless spray, brush, or roller |
Applications of High Build Epoxy
| Application |
|---|
| 1. Ship hulls, decks, and superstructures |
| 2. Ballast tanks, void spaces, and cargo areas |
| 3. Pipes, machinery foundations, and steel structures |
Models & Manufacturers
| Model | Manufacturer |
|---|---|
| Jotamastic 87 | Jotun |
| Hempadur Mastic 45880 | Hempel |
| Interzone 954 | International Protective Coatings |
| King Airless Sprayer | Graco |
| WIWA DUOMIX | WIWA |
Technical Specifications
| Model | Specification | Value | Unit |
|---|---|---|---|
| Jotamastic 87 | Coating type | Two-component high-solids epoxy mastic | — |
| Jotamastic 87 | Typical dry film thickness | 150-300 | micrometres |
| Hempadur Mastic 45880 | Coating type | Two-component epoxy mastic | — |
| Hempadur Mastic 45880 | Typical dry film thickness | 100-300 | micrometres |
| Interzone 954 | Coating type | Two-component epoxy coating | — |
| Interzone 954 | Application method | Airless spray, brush, or roller | — |
Standards, Certifications & Class Approval
Review the available standards and approval information relevant to the product. Actual certification, material traceability, inspection and classification requirements depend on the product type, intended application and purchasing specification.
| Applicable Standards & Certification | Product-specific technical data sheets govern compliance. Surface preparation is commonly specified to ISO 8501-1 and coating systems are commonly designed to ISO 12944. IMO PSPC compliance applies only where the complete approved coating system is qualified for the relevant tank service. |
|---|---|
| Class Approval | Approval is product- and application-specific. Marine coating systems may be accepted or approved by DNV, ABS, Lloyd's Register, Bureau Veritas, or ClassNK when specified and documented for the vessel service and coating system. |
Installation, Maintenance & Safety Information
| Installation Notes | Prepare steel by removing oil, salt, rust, and contamination. Abrasive blast or mechanically prepare the surface to the coating manufacturer's specified standard and profile. Mix components at the stated ratio, observe induction and pot life, and apply within specified temperature, humidity, and recoat limits. Use calibrated airless spray equipment with the recommended tip and pressure. |
|---|---|
| Maintenance Tips | Inspect coating for blistering, cracking, rust breakthrough, mechanical damage, and loss of adhesion. Clean surfaces before repair, remove defective coating and corrosion, feather edges, and reapply compatible primer or epoxy according to the manufacturer's repair procedure. Record batch numbers, film thickness, and environmental conditions. |
| Safety Notes | Use the current safety data sheet and provide ventilation during mixing and application. Wear chemical-resistant gloves, protective clothing, eye protection, and suitable respiratory protection. Keep away from ignition sources, avoid skin and eye contact, and treat airless spray injection injuries as medical emergencies. Dispose of residues and solvent waste according to local regulations. |
Request a Quote for High Build Epoxy
Contact ProShipWorks for marine or industrial product sourcing, quotations and delivery.
- Vessel name and IMO number
- ETA / vessel schedule
- Berth or vessel location
- Required quantity
- Preferred delivery window
- Shipping agent contact details
Other Marine Paint and Painting Equipment Products
Explore our range of marine and industrial Marine Paint and Painting Equipment products available for sourcing and supply through ProShipWorks.
Why ProShipWorks?
Trusted & Professional Service
Experienced maritime professionals focused on quality, safety and dependable service execution.
24/7 Rapid Response
Fast response for planned and urgent vessel requirements, whenever support is needed.
Unbeatable Prices
Cost-effective marine services with competitive and transparent pricing for vessel requirements.
Port & Anchorage Coverage
Reliable marine service support across ports, anchorages and offshore locations.