Oil Tank Paint - Marine Paint and Painting Equipment
Marine oil tank paint is a high-build protective coating used inside fuel oil, diesel oil, lubricating oil and other service tanks on ships. These coatings provide corrosion resistance and chemical compatibility when selected for the specific cargo, temperature and tank construction.
ProShipWorks provides end-to-end support to source and supply Oil Tank Paint for marine vessels, ship operators, industrial facilities, maintenance teams and procurement departments.
Last updated:
Product Information
| Product Name | Oil Tank Paint |
|---|---|
| Product Category | Marine Paint and Painting Equipment |
| Product Reference | 213 |
| Brands / Manufacturers | Jotun, Hempel, International Protective Coatings |
| Unit of Measure | Liter or Kit |
Key Features
| Key Feature |
|---|
| 1. Two-component epoxy or epoxy-phenolic formulation |
| 2. High resistance to petroleum oils and hydrocarbons |
| 3. Suitable for airless spray application |
| 4. High-build film for corrosion protection |
| 5. Available in repair kits and full coating systems |
Applications of Oil Tank Paint
| Application |
|---|
| 1. Fuel oil and diesel oil tanks |
| 2. Lubricating oil and hydraulic oil tanks |
| 3. Shipboard service tanks, settling tanks and storage tanks |
Models & Manufacturers
| Model | Manufacturer |
|---|---|
| Tankguard Storage | Jotun |
| Tankguard 412 | Jotun |
| Hempadur Tankguard 17360 | Hempel |
| Interline 850 | International Protective Coatings |
| Interline 994 | International Protective Coatings |
Technical Specifications
| Model | Specification | Value | Unit |
|---|---|---|---|
| Tankguard Storage | Coating type | Two-component epoxy tank coating | — |
| Tankguard 412 | Service | Tank lining for petroleum products and chemicals subject to product compatibility | — |
| Hempadur Tankguard 17360 | Coating type | Two-component epoxy tank coating | — |
| Interline 850 | Coating type | High-performance epoxy tank lining | — |
| Interline 994 | Coating type | Chemical-resistant epoxy tank lining | — |
| General marine application | Surface preparation | Abrasive blast cleaning to Sa 2.5 or manufacturer-approved equivalent | — |
| General marine application | Application equipment | Airless spray; brush or roller for stripe coating and small repairs | — |
Standards, Certifications & Class Approval
Review the available standards and approval information relevant to the product. Actual certification, material traceability, inspection and classification requirements depend on the product type, intended application and purchasing specification.
| Applicable Standards & Certification | Application should follow the coating manufacturer's product data sheet, ISO 12944 guidance and ISO 8501-1 surface-preparation requirements. IMO PSPC certification applies only where the complete coating system is specifically approved for applicable ballast-tank service. |
|---|---|
| Class Approval | Class acceptance is project- and product-specific. DNV, ABS, Lloyd's Register, Bureau Veritas and ClassNK may accept coating systems when supported by manufacturer documentation, type approval or vessel specification requirements. |
Installation, Maintenance & Safety Information
| Installation Notes | Confirm oil compatibility, operating temperature, immersion service and required dry-film thickness before ordering. Remove contamination and salts, abrasive-blast the steel, apply the specified stripe coat and spray coats, and observe mixing, induction, recoat and curing times. |
|---|---|
| Maintenance Tips | Inspect during tank entry and planned dry-dock periods for blistering, rusting, cracking and mechanical damage. Clean contamination, prepare damaged areas to sound coating or bare steel, and repair with the approved compatible system. |
| Safety Notes | Use the current safety data sheet and provide forced ventilation in enclosed tanks. Control ignition sources, use suitable respiratory and skin protection, verify atmosphere and oxygen levels, and follow enclosed-space entry, hot-work and hazardous-area procedures. |
Request a Quote for Oil Tank Paint
Contact ProShipWorks for marine or industrial product sourcing, quotations and delivery.
- Vessel name and IMO number
- ETA / vessel schedule
- Berth or vessel location
- Required quantity
- Preferred delivery window
- Shipping agent contact details
Other Marine Paint and Painting Equipment Products
Explore our range of marine and industrial Marine Paint and Painting Equipment products available for sourcing and supply through ProShipWorks.
Why ProShipWorks?
Trusted & Professional Service
Experienced maritime professionals focused on quality, safety and dependable service execution.
24/7 Rapid Response
Fast response for planned and urgent vessel requirements, whenever support is needed.
Unbeatable Prices
Cost-effective marine services with competitive and transparent pricing for vessel requirements.
Port & Anchorage Coverage
Reliable marine service support across ports, anchorages and offshore locations.