Phenolic Epoxy - Marine Paint and Painting Equipment
Phenolic epoxy marine coatings are two-component, chemically resistant protective paints used for ship tanks, cargo spaces, piping, decks, and offshore structures. Application normally requires abrasive blasting, controlled environmental conditions, and airless spray equipment.
ProShipWorks provides end-to-end support to source and supply Phenolic Epoxy for marine vessels, ship operators, industrial facilities, maintenance teams and procurement departments.
Last updated:
Product Information
| Product Name | Phenolic Epoxy |
|---|---|
| Product Category | Marine Paint and Painting Equipment |
| Product Reference | 935 |
| Brands / Manufacturers | Jotun, International Protective Coatings, Carboline, Hempel, Graco |
| Unit of Measure | Liter |
Key Features
| Key Feature |
|---|
| 1. High resistance to fuels, oils, solvents, and chemicals |
| 2. Good adhesion to correctly prepared steel |
| 3. Suitable for immersion and atmospheric service |
| 4. High-build application with airless spray equipment |
| 5. Available in tank-lining and corrosion-protection systems |
Applications of Phenolic Epoxy
| Application |
|---|
| 1. Fuel, ballast, cargo, and slop tank linings |
| 2. Marine steel structures, decks, and machinery spaces |
| 3. Pipelines, pumps, valves, and offshore equipment |
Models & Manufacturers
| Model | Manufacturer |
|---|---|
| Tankguard Storage | Jotun |
| Interline 850 | International Protective Coatings |
| Phenoline 187 | Carboline |
| Xtreme Airless Spray Package | Graco |
Technical Specifications
| Model | Specification | Value | Unit |
|---|---|---|---|
| Tankguard Storage | Coating type | Two-component epoxy phenolic tank coating | — |
| Interline 850 | Coating type | Two-component phenolic epoxy tank lining | — |
| Phenoline 187 | Coating type | Phenolic epoxy protective coating | — |
| Xtreme Airless Spray Package | Equipment type | High-pressure airless paint spray equipment | — |
Standards, Certifications & Class Approval
Review the available standards and approval information relevant to the product. Actual certification, material traceability, inspection and classification requirements depend on the product type, intended application and purchasing specification.
| Applicable Standards & Certification | Application and coating-system selection commonly reference ISO 12944 for corrosion protection, ISO 8501-1 for surface preparation, ISO 8502 for surface cleanliness, ISO 8503 for blast profile, and IMO PSPC requirements where applicable. Product-specific certificates must be verified with the manufacturer. |
|---|---|
| Class Approval | Class acceptance is product-, coating-system-, tank-service-, and project-specific. DNV, ABS, Lloyd's Register, BV, and ClassNK requirements may apply. Verify current manufacturer approvals and vessel-specific class documentation before use. |
Installation, Maintenance & Safety Information
| Installation Notes | Remove oil, salts, rust, and contaminants before abrasive blasting. Apply over the specified surface profile only when steel temperature is above the dew point and within the product data-sheet limits. Mix components at the stated ratio and apply by suitable airless spray equipment, observing recoat intervals and required dry-film thickness. |
|---|---|
| Maintenance Tips | Inspect coating condition during planned maintenance for blistering, rust breakthrough, cracking, and mechanical damage. Clean contaminated surfaces promptly, repair damaged areas using the approved preparation and compatible repair system, and record dry-film thickness and service exposure. |
| Safety Notes | Use the current safety data sheet and product data sheet. Provide ventilation, explosion-safe equipment, chemical-resistant gloves, protective clothing, eye protection, and suitable respiratory protection. Keep coatings and solvents away from ignition sources and observe enclosed-space entry and permit-to-work procedures. |
Request a Quote for Phenolic Epoxy
Contact ProShipWorks for marine or industrial product sourcing, quotations and delivery.
- Vessel name and IMO number
- ETA / vessel schedule
- Berth or vessel location
- Required quantity
- Preferred delivery window
- Shipping agent contact details
Other Marine Paint and Painting Equipment Products
Explore our range of marine and industrial Marine Paint and Painting Equipment products available for sourcing and supply through ProShipWorks.
Why ProShipWorks?
Trusted & Professional Service
Experienced maritime professionals focused on quality, safety and dependable service execution.
24/7 Rapid Response
Fast response for planned and urgent vessel requirements, whenever support is needed.
Unbeatable Prices
Cost-effective marine services with competitive and transparent pricing for vessel requirements.
Port & Anchorage Coverage
Reliable marine service support across ports, anchorages and offshore locations.