Galvanizing Paint - Marine Paint and Painting Equipment
Marine galvanizing paint is a zinc-rich protective coating used to provide sacrificial corrosion protection to steel structures, fabricated parts, repairs, and areas where hot-dip galvanizing is impractical. It is commonly supplied as cold-galvanizing paint, zinc-rich epoxy, or inorganic zinc coating.
ProShipWorks provides end-to-end support to source and supply Galvanizing Paint for marine vessels, ship operators, industrial facilities, maintenance teams and procurement departments.
Last updated:
Product Information
| Product Name | Galvanizing Paint |
|---|---|
| Product Category | Marine Paint and Painting Equipment |
| Product Reference | 925 |
| Brands / Manufacturers | Zinga, AkzoNobel International, Hempel, Jotun, Sherwin-Williams |
| Unit of Measure | Liter |
Key Features
| Key Feature |
|---|
| 1. Sacrificial zinc protection for carbon steel |
| 2. Suitable for marine and atmospheric exposure |
| 3. Used for touch-up and repair of galvanized surfaces |
| 4. Available in single-component and two-component formulations |
| 5. Can be applied by brush, roller, or spray |
Applications of Galvanizing Paint
| Application |
|---|
| 1. Ship decks, handrails, ladders, and structural steel |
| 2. Repair of damaged hot-dip galvanized surfaces |
| 3. Pipes, brackets, supports, and machinery foundations |
| 4. Shipbuilding and ship-repair corrosion protection |
Models & Manufacturers
| Model | Manufacturer |
|---|---|
| ZINGA | Zinga |
| Interzinc 52 | AkzoNobel International |
| Hempadur Zinc 17360 | Hempel |
| Barrier 77 | Jotun |
| Zinc Clad 4.0 | Sherwin-Williams |
Technical Specifications
| Model | Specification | Value | Unit |
|---|---|---|---|
| ZINGA | Coating type | Single-component zinc coating | — |
| ZINGA | Dry-film zinc content | Approximately 96 | % |
| Interzinc 52 | Coating type | Two-component inorganic zinc silicate primer | — |
| Hempadur Zinc 17360 | Coating type | Two-component zinc-rich epoxy primer | — |
| Barrier 77 | Coating type | Two-component zinc-rich epoxy primer | — |
| Zinc Clad 4.0 | Coating type | Two-component zinc-rich epoxy primer | — |
Standards, Certifications & Class Approval
Review the available standards and approval information relevant to the product. Actual certification, material traceability, inspection and classification requirements depend on the product type, intended application and purchasing specification.
| Applicable Standards & Certification | Relevant references include ISO 12944 for corrosion protection of steel structures, ISO 8501-1 and ISO 8502 for surface preparation, and ASTM A780 for repair of damaged hot-dip galvanized coatings. Product-specific approvals and compliance must be verified from the manufacturer’s technical data sheet. |
|---|---|
| Class Approval | Marine coating acceptance is normally project- and system-specific rather than universally class-approved. DNV, ABS, Lloyd’s Register, BV, and ClassNK may accept coating systems when specified, tested, and documented in accordance with vessel requirements. |
Installation, Maintenance & Safety Information
| Installation Notes | Remove oil, salt, rust, mill scale, and loose coating. Abrasive blast or mechanically prepare the steel to the manufacturer’s specified standard and roughness. Apply only within specified temperature, humidity, and dew-point limits, and observe recoat and curing times. |
|---|---|
| Maintenance Tips | Inspect periodically for blistering, cracking, rust breakthrough, and mechanical damage. Clean salt and contaminants, remove loose material, and repair damaged areas using the same approved coating system. Record batch numbers and applied dry-film thickness. |
| Safety Notes | Use the product safety data sheet, suitable gloves, eye protection, protective clothing, and approved respiratory protection. Provide forced ventilation in enclosed spaces, control ignition sources, and observe solvent and curing hazards. Follow marine confined-space and hot-work procedures. |
Request a Quote for Galvanizing Paint
Contact ProShipWorks for marine or industrial product sourcing, quotations and delivery.
- Vessel name and IMO number
- ETA / vessel schedule
- Berth or vessel location
- Required quantity
- Preferred delivery window
- Shipping agent contact details
Other Marine Paint and Painting Equipment Products
Explore our range of marine and industrial Marine Paint and Painting Equipment products available for sourcing and supply through ProShipWorks.
Why ProShipWorks?
Trusted & Professional Service
Experienced maritime professionals focused on quality, safety and dependable service execution.
24/7 Rapid Response
Fast response for planned and urgent vessel requirements, whenever support is needed.
Unbeatable Prices
Cost-effective marine services with competitive and transparent pricing for vessel requirements.
Port & Anchorage Coverage
Reliable marine service support across ports, anchorages and offshore locations.