Filter Elements - Pumps, Valves, Piping and Fittings
Replacement filter elements used in marine pump, valve, piping and fitting systems to remove particulate, contaminants and, where applicable, water or oil from hydraulic, lubrication, fuel, cooling and process fluids. Correct selection requires matching the housing, element dimensions, filtration rating, media and pressure rating.
ProShipWorks provides end-to-end support to source and supply Filter Elements for marine vessels, ship operators, industrial facilities, maintenance teams and procurement departments.
Last updated:
Product Information
| Product Name | Filter Elements |
|---|---|
| Product Category | Pumps, Valves, Piping and Fittings |
| Product Reference | 706 |
| Brands / Manufacturers | Parker Hannifin, Eaton, Pall, HYDAC, Donaldson, MAHLE |
| Unit of Measure | Piece |
Key Features
| Key Feature |
|---|
| 1. Available in particulate, coalescing, water-separating and oil-removal configurations |
| 2. Filter media may include cellulose, synthetic fiber, glass fiber, wire mesh or stainless steel mesh |
| 3. Specified by filtration rating, dimensions, seal material and collapse pressure |
| 4. Used with fuel, lubricating oil, hydraulic oil, cooling water and process-fluid systems |
| 5. Replacement elements should match the original manufacturer's housing and flow direction |
Applications of Filter Elements
| Application |
|---|
| 1. Main and auxiliary engine fuel, lube-oil and hydraulic systems |
| 2. Marine pumps, valve hydraulic power units and control systems |
| 3. Sea-water, cooling-water, ballast, bilge, fire-main and process piping systems |
Technical Specifications
| Model | Specification | Value | Unit |
|---|---|---|---|
| Replacement filter element | Filtration rating | Application-dependent; commonly specified in micrometres | µm |
| Replacement filter element | Filter media | Cellulose, synthetic, glass-fiber, wire mesh or stainless-steel mesh | — |
| Replacement filter element | Seal material | Selected to suit fluid and temperature; commonly NBR, FKM or EPDM | — |
| Replacement filter element | Compatibility | Must match filter housing, connection geometry, flow direction and pressure rating | — |
Standards, Certifications & Class Approval
Review the available standards and approval information relevant to the product. Actual certification, material traceability, inspection and classification requirements depend on the product type, intended application and purchasing specification.
| Applicable Standards & Certification | Certification depends on the complete filter assembly and application. Relevant requirements may include ISO 16889 for hydraulic filter performance, ISO 2941 for collapse or burst pressure, ISO 4406 for hydraulic-fluid cleanliness reporting, and applicable IMO or flag-state requirements. |
|---|---|
| Class Approval | Classification approval is generally associated with the complete piping, filtration or machinery system rather than an interchangeable element alone. Acceptance may involve DNV, ABS, Lloyd's Register, Bureau Veritas or ClassNK, subject to vessel notation and application. |
Installation, Maintenance & Safety Information
| Installation Notes | Verify part number, dimensions, filtration rating, media, seal material and pressure rating before installation. Isolate and depressurize the system, drain or contain fluid, clean the housing, inspect sealing surfaces, install in the correct flow direction and check for leakage during commissioning. |
|---|---|
| Maintenance Tips | Monitor differential pressure, flow reduction and fluid cleanliness. Replace at the manufacturer's differential-pressure limit or scheduled interval, and replace damaged, collapsed or contaminated elements. Keep spare elements sealed and protected from moisture, dust and mechanical damage. |
| Safety Notes | Isolate, lock out and depressurize the system before opening the filter housing. Allow hot fluids to cool and use suitable PPE for fuel, oil, chemicals or contaminated water. Dispose of used elements and drained fluids in accordance with vessel procedures and environmental regulations. |
Request a Quote for Filter Elements
Contact ProShipWorks for marine or industrial product sourcing, quotations and delivery.
- Vessel name and IMO number
- ETA / vessel schedule
- Berth or vessel location
- Required quantity
- Preferred delivery window
- Shipping agent contact details
Other Pumps, Valves, Piping and Fittings Products
Explore our range of marine and industrial Pumps, Valves, Piping and Fittings products available for sourcing and supply through ProShipWorks.
Why ProShipWorks?
Trusted & Professional Service
Experienced maritime professionals focused on quality, safety and dependable service execution.
24/7 Rapid Response
Fast response for planned and urgent vessel requirements, whenever support is needed.
Unbeatable Prices
Cost-effective marine services with competitive and transparent pricing for vessel requirements.
Port & Anchorage Coverage
Reliable marine service support across ports, anchorages and offshore locations.