PTFE Gaskets - Pumps, Valves, Piping and Fittings
PTFE gaskets are chemically resistant sealing components used on marine pumps, valves, pipe flanges and fittings. They are supplied as virgin, filled, modified or expanded PTFE designs selected for corrosive fluids, low friction and broad temperature service.
ProShipWorks provides end-to-end support to source and supply PTFE Gaskets for marine vessels, ship operators, industrial facilities, maintenance teams and procurement departments.
Last updated:
Product Information
| Product Name | PTFE Gaskets |
|---|---|
| Product Category | Pumps, Valves, Piping and Fittings |
| Product Reference | 641 |
| Brands / Manufacturers | Garlock, KLINGER, TEADIT |
| Unit of Measure | Piece |
Key Features
| Key Feature |
|---|
| 1. Excellent resistance to seawater, oils, fuels and many chemicals |
| 2. Low friction and non-stick sealing surface |
| 3. Available in virgin, filled, modified and expanded PTFE grades |
| 4. Suitable for flanged piping, pumps, valves and fittings |
| 5. Requires control of bolt load because PTFE can creep and relax |
Applications of PTFE Gaskets
| Application |
|---|
| 1. Seawater, ballast and cooling-water piping |
| 2. Fuel, lube-oil, chemical and cargo systems |
| 3. Marine pumps, valves, strainers, heat exchangers and pipe flanges |
Models & Manufacturers
| Model | Manufacturer |
|---|---|
| GYLON Style 3500 | Garlock |
| GYLON Style 3504 | Garlock |
| GYLON Style 3545 | Garlock |
| top-chem 2000 | KLINGER |
| KLINGER Soft-Chem | KLINGER |
| TEADIT 24 SH | TEADIT |
Technical Specifications
| Model | Specification | Value | Unit |
|---|---|---|---|
| GYLON Style 3500 | Construction | Modified PTFE gasket sheet | — |
| GYLON Style 3504 | Construction | Filled PTFE gasket sheet | — |
| GYLON Style 3545 | Construction | High-performance filled PTFE gasket sheet | — |
| top-chem 2000 | Construction | Modified PTFE gasket material | — |
| KLINGER Soft-Chem | Construction | Expanded PTFE gasket material | — |
| TEADIT 24 SH | Construction | Expanded PTFE gasket material | — |
| All models | Form | Cut gasket, sheet, strip or envelope gasket | — |
| All models | Dimensions | To flange standard, equipment drawing or approved gasket schedule | — |
Standards, Certifications & Class Approval
Review the available standards and approval information relevant to the product. Actual certification, material traceability, inspection and classification requirements depend on the product type, intended application and purchasing specification.
| Applicable Standards & Certification | Common design and dimensional references include ASME B16.21, EN 1514-1, DIN 2690 and ASTM F104 where applicable. Chemical compatibility, pressure-temperature limits and bolt-load requirements must be confirmed from the manufacturer's current datasheet. |
|---|---|
| Class Approval | Individual PTFE gasket sheets and cut gaskets do not universally carry independent marine class approval. Acceptance may be subject to DNV, ABS, Lloyd's Register, Bureau Veritas or ClassNK requirements for the installed piping or equipment system. |
Installation, Maintenance & Safety Information
| Installation Notes | Verify gasket material compatibility, flange standard, pressure class, temperature and dimensions before installation. Clean and inspect flange faces, use the specified gasket thickness, align the gasket correctly, and tighten bolts in a calibrated cross-pattern sequence to the approved torque. |
|---|---|
| Maintenance Tips | Inspect accessible flange joints for leakage, staining, bolt relaxation or damage during planned maintenance. Replace gaskets after disassembly unless the manufacturer and equipment procedure specifically permit reuse. Recheck bolt condition and torque requirements after commissioning where specified. |
| Safety Notes | Depressurize, drain, isolate and verify zero energy before opening any joint. Use suitable PPE for the contained fluid and hot surfaces. Do not exceed the gasket manufacturer's pressure-temperature limits, and avoid excessive bolt tightening that can damage flanges or cause PTFE creep. |
Request a Quote for PTFE Gaskets
Contact ProShipWorks for marine or industrial product sourcing, quotations and delivery.
- Vessel name and IMO number
- ETA / vessel schedule
- Berth or vessel location
- Required quantity
- Preferred delivery window
- Shipping agent contact details
Other Pumps, Valves, Piping and Fittings Products
Explore our range of marine and industrial Pumps, Valves, Piping and Fittings products available for sourcing and supply through ProShipWorks.
Why ProShipWorks?
Trusted & Professional Service
Experienced maritime professionals focused on quality, safety and dependable service execution.
24/7 Rapid Response
Fast response for planned and urgent vessel requirements, whenever support is needed.
Unbeatable Prices
Cost-effective marine services with competitive and transparent pricing for vessel requirements.
Port & Anchorage Coverage
Reliable marine service support across ports, anchorages and offshore locations.