Seals - Pumps, Valves, Piping and Fittings
Marine seals provide leak-tight separation and protection in pumps, valves, piping systems, flanges and rotating equipment. Common types include mechanical seals, O-rings, gaskets, packing, lip seals and expansion-joint seals, selected according to fluid, pressure, temperature and shaft or flange dimensions.
ProShipWorks provides end-to-end support to source and supply Seals for marine vessels, ship operators, industrial facilities, maintenance teams and procurement departments.
Last updated:
Product Information
| Product Name | Seals |
|---|---|
| Product Category | Pumps, Valves, Piping and Fittings |
| Product Reference | 166 |
| Brands / Manufacturers | EagleBurgmann, John Crane, AESSEAL, Chesterton, Trelleborg, Garlock, Klinger, James Walker |
| Unit of Measure | Piece or Set |
Key Features
| Key Feature |
|---|
| 1. Controls leakage of seawater, freshwater, fuel, oil, chemicals and process fluids |
| 2. Available for static and dynamic sealing applications |
| 3. Materials selected for pressure, temperature, chemical and wear resistance |
| 4. Suitable for pumps, valves, flanges, pipe joints and rotating shafts |
| 5. Supplied in standard or equipment-specific dimensions |
Applications of Seals
| Application |
|---|
| 1. Marine centrifugal, ballast and seawater cooling pumps |
| 2. Valve stems, bonnets, flanges and pipe connections |
| 3. Fuel oil, lubricating oil, hydraulic and cargo piping systems |
Models & Manufacturers
| Model | Manufacturer |
|---|---|
| MG1 | EagleBurgmann |
| Type 21 | John Crane |
| Type 1 | AESSEAL |
| DuraLine | Chesterton |
| GFLT | Garlock |
| K45 | Klinger |
Technical Specifications
| Model | Specification | Value | Unit |
|---|---|---|---|
| MG1 | Seal type | Single mechanical seal | — |
| Type 21 | Seal type | Component mechanical seal | — |
| GFLT | Material | Compressed fibre gasket material with PTFE | — |
| K45 | Application | Valve and flange sealing | — |
| General | Common seal materials | NBR, EPDM, FKM, PTFE, graphite, aramid fibre, carbon and silicon carbide | — |
Standards, Certifications & Class Approval
Review the available standards and approval information relevant to the product. Actual certification, material traceability, inspection and classification requirements depend on the product type, intended application and purchasing specification.
| Applicable Standards & Certification | Applicable standards depend on seal type and service. Common references include EN 12756 and ISO 3069 for mechanical seals, ISO 3601 for O-rings, EN 1514 for flange gaskets, EN 12560 for industrial flange gaskets, and API 682 for selected process-pump mechanical seals. |
|---|---|
| Class Approval | Marine seals may be accepted as part of class-approved pumps, valves or piping assemblies. Where required, documentation may involve DNV, ABS, Lloyd's Register, Bureau Veritas or ClassNK approval; approval is product- and application-specific and is not universal for all seals. |
Installation, Maintenance & Safety Information
| Installation Notes | Verify seal type, dimensions, shaft size, flange rating, fluid compatibility, pressure and temperature before installation. Clean mating surfaces, inspect shafts and bores, lubricate elastomers with a compatible medium, and install without twisting, cuts or contamination. Follow the equipment manufacturer's assembly instructions. |
|---|---|
| Maintenance Tips | Inspect for leakage, wear, hardening, extrusion, corrosion and loss of compression during planned maintenance. Monitor pump seal leakage and operating temperature. Replace damaged seals and renew gaskets when joints are opened unless the manufacturer permits reuse. |
| Safety Notes | Isolate, depressurize, drain and cool the system before removing a seal. Apply lockout/tagout and verify zero energy. Use seals compatible with the fluid and temperature, especially for fuel, chemicals and high-pressure systems. Wear appropriate gloves, eye protection and respiratory protection where required. |
Request a Quote for Seals
Contact ProShipWorks for marine or industrial product sourcing, quotations and delivery.
- Vessel name and IMO number
- ETA / vessel schedule
- Berth or vessel location
- Required quantity
- Preferred delivery window
- Shipping agent contact details
Other Pumps, Valves, Piping and Fittings Products
Explore our range of marine and industrial Pumps, Valves, Piping and Fittings products available for sourcing and supply through ProShipWorks.
Why ProShipWorks?
Trusted & Professional Service
Experienced maritime professionals focused on quality, safety and dependable service execution.
24/7 Rapid Response
Fast response for planned and urgent vessel requirements, whenever support is needed.
Unbeatable Prices
Cost-effective marine services with competitive and transparent pricing for vessel requirements.
Port & Anchorage Coverage
Reliable marine service support across ports, anchorages and offshore locations.